Recent Activity

Activity stream for all registered members at HiFi Haven.

  1. StevenZ replied to the thread Yet another Dave Slagle AVC build.

    That's my concern too. The wire is thin enough to just melt away if I'm not careful. Maybe for a few bucks @opa1 can solder it up for...

    Sep 19, 2018 at 5:19 PM
  2. StevenZ liked MikeT.'s post in the thread Yet another Dave Slagle AVC build.

    Don’t burn it! I tried that one and everything melted. A soldering iron touched to the wire and pulled slightly down and away worked...

    Sep 19, 2018 at 5:18 PM
  3. JohnVF replied to the thread New Turntable (Vintage) Needs a Tonearm.

    That looks like a great solution. I've only done a few of these and used a Forstner bit with great results. With the arms I've used, the...

    Sep 19, 2018 at 4:55 PM
  4. MikeT. liked airdronian's post in the thread New Knopfler release on the way..

    Just got the email for the new release - "Down The Road Wherever". I've enjoyed the last two: "Privateering", and "Tracker"....

    MK_DownTheRoadWherever.png Sep 19, 2018 at 4:50 PM
  5. MikeT. replied to the thread Yet another Dave Slagle AVC build.

    Don’t burn it! I tried that one and everything melted. A soldering iron touched to the wire and pulled slightly down and away worked...

    Sep 19, 2018 at 4:47 PM
  6. mhardy6647 liked Redboy's post in the thread GPA New Alnico 604-8E Duplex!.

    @ejfud is a stealthy fella but he's got good taste in sperkers, yup. His amps, tho -- weird lookin' things that some hack cobbled...

    Sep 19, 2018 at 4:46 PM
  7. MikeT. attached a file to the thread New Turntable (Vintage) Needs a Tonearm.

    This Fisch 30mm wave cutter Forstner bit is on its way and should be here tomorrow. There’s a woodworking shop two miles from my house...

    392C49B2-0418-4FAE-821C-D65F9FA38965.jpeg B4D25F83-EDD4-4E9E-92E2-325D0344B64A.jpeg Sep 19, 2018 at 4:41 PM
  8. airdronian liked opa1's post in the thread This followed me home.

    Figured a burnout pic was necessary. Makes me feel better! :) [ATTACH]

    IMG_3250-S.jpg Sep 19, 2018 at 4:28 PM
  9. Thermionics liked mhardy6647's post in the thread Altec 604-8G sanity check.

    Nope -- we're just enablers, that's what we are.

    Sep 19, 2018 at 4:26 PM
  10. Thermionics liked John Frum's post in the thread Altec 604-8G sanity check.

    I'm pulling the trigger on these. Y'all are a bad influence.

    Sep 19, 2018 at 4:25 PM
  11. StevenZ replied to the thread Yet another Dave Slagle AVC build.

    Thanks. I don't exactly have one of those so what would be the next easiest method?

    Sep 19, 2018 at 4:18 PM
  12. Thermionics liked JohnVF's post in the thread Schiit yggdrasil Analog 2 anyone?.

    The Brooklyn is the DAC I looked at most recently, as I often us my DACs as preamps..and its a full function preamp w/phono input and...

    Sep 19, 2018 at 4:18 PM
  13. Thermionics replied to the thread Yet another Dave Slagle AVC build.

    Easiest method is a solder pot.

    Sep 19, 2018 at 4:17 PM
  14. JohnVF liked StevenZ's post in the thread Yet another Dave Slagle AVC build.

    Well, everyone showed up, except for the birthday boy. Dave is going to ship by the end of this week. I opted for the new-ish 47-step...

    20180919_144934.jpg Sep 19, 2018 at 4:03 PM
  15. StevenZ posted a new thread.

    Yet another Dave Slagle AVC build

    Well, everyone showed up, except for the birthday boy. Dave is going to ship by the end of this week. I opted for the new-ish 47-step...

    20180919_144934.jpg

    Forum: Everything Audio

    Sep 19, 2018 at 3:58 PM
Loading...